Featured Juniper certification JN0-532 exam test questions and answers

In recent years, fierce competition agitates the forwarding IT industry in the world. And IT certification has become a necessity. If you want to get a good improvement in your career, The method that using the ITCertKing’s Juniper JN0-532 exam training materials to obtain a certificate is very feasible. Our exam materials are including all the questions which the exam required. So the materials will be able to help you to pass the exam.

ITCertKing to provide you with the real exam environment to help you find the real Juniper JN0-532 exam preparation process. If you are a beginner or want to improve your professional skills, ITCertKing Juniper JN0-532 will help you, let you approached you desire step by step. If you have any questions on the exam question and answers, we will help you solve it. Within a year, we will offer free update.

Are you still upset about how to pass Juniper certification JN0-532 exam? Are you still waiting for the latest information about Juniper certification JN0-532 exam? ITCertKing has come up with the latest training material about Juniper certification JN0-532 exam. Do you want to pass Juniper certification JN0-532 exam easily? Please add ITCertKing's Juniper certification JN0-532 exam practice questions and answers to your cart now! ITCertKing has provided part of Juniper certification JN0-532 exam practice questions and answers for you on www.ITCertKing.com and you can free download as a try. I believe you will be very satisfied with our products. With our products you can easily pass the exam. We promise that if you have used ITCertKing's latest Juniper certification JN0-532 exam practice questions and answers exam but fail to pass the exam, ITCertKing will give you a full refund.

Exam Code: JN0-532
Exam Name: Juniper (FWV,Specialist (JNCIS -FWV))
One year free update, No help, Full refund!
Total Q&A: 146 Questions and Answers
Last Update: 2013-11-22

There are many ways to help you pass Juniper certification JN0-532 exam and selecting a good pathway is a good protection. ITCertKing can provide you a good training tool and high-quality reference information for you to participate in the Juniper certification JN0-532 exam. ITCertKing's practice questions and answers are based on the research of Juniper certification JN0-532 examination Outline. Therefore, the high quality and high authoritative information provided by ITCertKing can definitely do our best to help you pass Juniper certification JN0-532 exam. ITCertKing will continue to update the information about Juniper certification JN0-532 exam to meet your need.

Having Juniper certification JN0-532 exam certificate is equivalent to your life with a new milestone and the work will be greatly improved. I believe that everyone in the IT area is eager to have it. A lot of people in the discussion said that such a good certificate is difficult to pass and actually the pass rate is quite low. Not having done any efforts of preparation is not easy to pass, after all, Juniper certification JN0-532 exam requires excellent expertise. Our ITCertKing is a website that can provide you with a shortcut to pass Juniper certification JN0-532 exam. ITCertKing have a training tools of Juniper certification JN0-532 exam which can ensure you pass Juniper certification JN0-532 exam and gain certificate, but also can help you save a lot of time. Such a ITCertKing that help you gain such a valuable certificate with less time and less money is very cost-effective for you.

JN0-532 Free Demo Download: http://www.itcertking.com/JN0-532_exam.html

NO.1 What must be enabled to protect Phase 2 key exchanges?
A.Phase 1 PFS
B.Phase 2 SHA
C.Phase 2 3-DES
D.Phase 2 DH key exchange tiations? (Choose two.)
A.proxy-id, SA proposal list
B.IKE cookie, SA proposal list
C.hash [ID + Key], DH key exchange
D.SA proposal list, optional DH key exchange
Answer: D

Juniper dumps   JN0-532 questions   JN0-532 dumps   JN0-532   JN0-532 answers real questions   JN0-532 test

NO.2 Click the Exhibit button.
In the exhibit, which two can be determined about the VPN? (Choose two.)
A.NAT-traversal is enabled.
B.The rekey interval is 8 hours.
C.This device initiated the Phase 1 negotiations.
D.The certificate used in this exchange is set to never expire.
Answer: BC

Juniper   JN0-532   JN0-532   JN0-532   JN0-532 demo

NO.3 Click the Exhibit button.
In the exhibit, what is the address of the multicast receiver?
A.234.9.8.42
B.192.168.10.2
C.192.168.20.10
D.192.168.20.200
Answer: D

Juniper   JN0-532   JN0-532 answers real questions

NO.4 What must be configured differently for a route-based VPN and a policy-based VPN?
A.proxy-id
B.proposals
C.remote gateway type
D.binding the tunnel interface
Answer: D

Juniper certification training   JN0-532   JN0-532   JN0-532

NO.5 Which three statements are true regarding IKE Phase 1? (Choose three.)
A.Placing the SA proposal list in message 1 is an option.
B.The digital certificate is used to decrypt the session key.
C.The DH key exchange is used to validate the session key.
D.The DH key exchange and digital certificates are both optional.
E.The proxy-id is used to determine which SA is referenced for the VPN.
Answer: ABC

Juniper   JN0-532 exam   JN0-532   JN0-532 braindump   JN0-532

NO.6 Which two item pairs are exchanged during Phase 2 negotiations? (Choose two.)
A.proxy-id, SA proposal list
B.IKE cookie, SA proposal list
C.hash [ID + Key], DH key exchange
D.SA proposal list, optional DH key exchange
Answer: AD

Juniper   JN0-532 study guide   JN0-532

NO.7 Which ScreenOS CLI command is necessary for configuring IGMP on interface ethernet0/1?
A.set igmp interface ethernet0/1
B.set multicast interface ethernet0/1
C.set interface ethernet0/1 igmp router
D.set igmp interface ethernet0/1 enable
Answer: C

Juniper   JN0-532   JN0-532

NO.8 During main mode negations a failure has occurred while using IKE certificates.
Which message pair would you review to troubleshoot this failure?
A.messages 1 & 2
B.messages 2 & 3
C.messages 3 & 4
D.messages 5 & 6
Answer: D

Juniper   JN0-532   JN0-532 exam dumps   JN0-532

NO.9 Review the exhibit.
You've been asked to build a route-based hub and spoke network, with policy control for traffic travelling
from spoke to spoke. Which two of the following configuration options will meet this requirement?
(Choose two.)
A.Place the spoke tunnel interfaces in the trust zone and create policies on the spokes.
B.Place the spoke tunnel interfaces in the untrust zone and create policies on the spokes.
C.Create a single tunnel interface in the trust zone at the hub and enable intra-zone blocking.
D.Create separate tunnel interfaces at the hub and place them in different zones, then create policies at
the hub.
Answer: BD

Juniper   JN0-532   JN0-532 dumps   JN0-532

NO.10 Which command is used to verify that IGMP is running correctly?
A.get route igmp
B.get igmp query
C.set igmp query interface e0/1
D.exec igmp interface e0/1 query
Answer: D

Juniper   JN0-532   JN0-532 study guide   JN0-532 answers real questions   JN0-532 exam

NO.11 Which CLI command identifies the multicast sources visible to your ScreenOS device?
A.get route pim
B.get igmp source all
C.exec pim interface all query
D.get vrouter trust-vr protocol pim
Answer: D

Juniper study guide   JN0-532   JN0-532

NO.12 Click the Exhibit button.
Review the exhibit. Track-ip has failed on the device, but the device did not fail over to the second unit in
the cluster:
Why has failover not occurred?
A.The physical interfaces have not failed.
B.The track-ip interval is not sufficient to cause failover.
C.The track-ip address weight is not sufficient to cause failover.
D.The track-ip address threshold is not sufficient to cause failover.
Answer: C

Juniper   JN0-532   JN0-532

NO.13 Which three OSPF parameters are interface parameters? (Choose three.)
A.cost
B.priority
C.neighbor list
D.summarization
E.advertise default route
Answer: ABC

Juniper   JN0-532 certification   JN0-532 exam dumps   JN0-532

NO.14 Click the Exhibit button.
In the exhibit, what is the source IP address of the multicast traffic?
A.236.1.1.1
B.10.10.10.1
C.20.20.20.10
D.20.20.20.200
Answer: B

Juniper pdf   JN0-532 test answers   JN0-532 exam   JN0-532

NO.15 To which three ScreenOS components can a policy-based routing policy be bound? (Choose three.)
A.zone
B.policy
C.interface
D.virtual router
E.virtual system
Answer: ACD

Juniper exam simulations   JN0-532   JN0-532

NO.16 You have entered the command set ffilter src-ip 1.1.7.250 dst-ip 10.1.10.5 ip-prot 6
What will be the resulting output in the debug for which this was created?
A.If the packet has a src-ip of 1.1.7.250 or a dst-ip of 10.1.10.5 or has TCP as its protocol then it will be
captured
B.If the packet has a src-ip of 1.1.7.250 or a dst-ip of 10.1.10.5 or has UDP as its protocol then it will be
captured
C.If the packet has a src-ip of 1.1.7.250 and a dst-ip of 10.1.10.5 and has TCP as its protocol then it will
be captured
D.If the packet has a src-ip of 1.1.7.250 and a dst-ip of 10.1.10.5 and has UDP as its protocol then it will
be captured
Answer: C

Juniper study guide   JN0-532   JN0-532   JN0-532 original questions   JN0-532 dumps   JN0-532 answers real questions

NO.17 You have created a virtual router called VSYSA-vr and made it shareable. You then create the VSYS
using the WebUI, telling it to use an existing VR and selecting the VR called VSYSA-vr.
What is the status of the virtual router after you create the VSYS?
A.The router will be the default router but will no longer be shared.
B.The router will be the default router and will still have a shareable status.
C.The system will not let you use a shared virtual router when you create a new VSYS. The initial virtual
router must be private.
D.The system will not create a private vr for the VSYS but will assign the untrust-vr as the default router.
The shared Virtual router will not be the default router.
Answer: B

Juniper questions   JN0-532   JN0-532 certification   JN0-532

NO.18 Review the exhibit.
Which two of the following elements must be configured on the ScreenOS device in order to support
PIM-SM? (Choose two)
A.A multicast control policy
B.A bootstrap router process
C.A unicast routing protocol
D.A static RP
Answer: AC

Juniper   JN0-532 exam dumps   JN0-532 exam simulations   JN0-532

NO.19 You have configured the following on your device.
set address trust MyPC 10.1.1.5/32
set address untrust CorpNet 10.10.0.0/16
set policy from trust to untrust MyPC CorpNet any permit
set int tunnel.1 zone untrust
set int tunnel.1 ip unnumbered int bgroup1
set ike gateway GW address 1.1.1.1 outgoing-interface e0/1 preshare Secret sec-level standard
set vpn VPN gateway GW sec-level standard
The tunnel interface is down, so the VPN cannot function properly. What is the problem?
A.The policy needs to have the action tunnel.
B.The VPN needs to be bound to the tunnel interface.
C.The tunnel interface needs to be placed in the trust zone.
D.The tunnel interface needs to be associated with the interface in the untrust zone.
Answer: B

Juniper test answers   JN0-532   JN0-532 practice test   JN0-532

NO.20 Click the Exhibit button.
In the exhibit, the firewall administrator at the Storefront is complaining that when the communication to
the DataCenter1 fails, the preexisting transfers and applications are dropped when the traffic is switched
to DataCenter2.
Which statement explains this behavior?
A.SYN checking is enabled in the tunnel.
B.The weight value for the DataCenter2 is too high.
C.VPN monitor is misconfigured in the DataCenter2.
D.Phase 1 and Phase 2 negotiations to DataCenter2 did not occur on time.
Answer: A

Juniper   JN0-532   JN0-532   JN0-532

ITCertKing offer the latest 70-460 exam material and high-quality HP2-T23 pdf questions & answers. Our HP2-B105 VCE testing engine and HP2-B102 study guide can help you pass the real exam. High-quality 000-N37 dumps training materials can 100% guarantee you pass the exam faster and easier. Pass the exam to obtain certification is so simple.

Article Link: http://www.itcertking.com/JN0-532_exam.html